JUPITER

 329

  • Custom 3D PRINTED for maximum comfort
  • Huge stereo image, warm and clear sound, enhanced high frequencies due to its special acoustic design. The linear response in frequency, with a slight emphasis on low frequencies, recommends JUPITER as stage monitors for both beginners and experienced players.
  • Can be used as by audiophiles in audio recordings and live concerts.
  • Very easy to insert in the ear and almost invisible, but extremely comfortable
  • Can also be used as hearing protection
  • Tailored to your ear canal
  • Resistant to shocks and scratches, covered with a thin layer of lacquer that becomes soft at body temperature. Biocompatible.
  • Description
  • Premium cable Upgrade
  • Premium Invisible cable upgrade
  • Technical Specifications
  • Service Costs
  • TERMS AND CONDITIONS

Description

  • Custom 3D PRINTED for maximum comfort
  • JUPITER monitors are created exclusively using 3D PRINTING technology, which delivers precision of down to 1 micron, being the most advanced technology in the world.
  • Built from flexible material and covered with a soft, antibacterial and biocompatible lacquer that becomes soft in the ear at body temperature, the JUPITER in ear monitors represent the highest degree of comfort that can be achieved for a personalised headset at the moment.
  • Enormous stereo image, clear and warm sound, enhanced high frequencies due to the special acoustic design. The linear frequency response, with a slight emphasis on low frequencies, recommends Flex 1 as stage monitors for both beginners and experienced players.
  • Can be used as by audiophiles, in audio recordings and live concerts.
  • Very easy to insert in the ear and almost invisible, but extremely comfortable
  • Can also be used as hearing protection
  • Personalised to your ear
  • They can also be used as hearing protectors, almost invisible in the ear canal, made out of transparent and flexible material.
  • Perfect seal inside the ear canal, due to the flexible material and 3D printing technology, accurate down to one micron (a thousand times smaller than a milimeter). The monitor also seals perfectly when opening the mouth or other movements, where the classical acrylic shell monitors usually fail.
  • The degree of isolation from the exterior is much higher than the classical acrylic monitors, isolation down to 35 dB, resulting in increased hearing protection and huge comfort on stage.
  • Maintenance, repair and upgrade cost are very small: 100 € for full repair, regardless of the electronic fault(including drivers, stock cable and faceplate)
  • Can be customised in premium or premium invisible version
  • Resistant to shocks and scratches, covered with a layer of lacquer that becomes soft at body temperature. Biocompatible.

The premium package includes the specially designed cable for tonal neutrality, maximum comfort and perfect stereo image. Built for high-quality recordings, audiofiles and high-class artists, it surprises with absolute robustness and clarity; a cable made by the pretentious for professionals:

* Termination: 3.5 TRS (90 ° angled), 2.5 TRRS *

* Copper-plated silver conductors

* Quad-twisted cord - 84 wires

* Weight: 5-6g

* Length: 127 cm / 50 "

* Impedance: 1.50 Ω

* Tensile strength: 120 N / 12 kgF

* Stethoscopic effect: low

* Almost impossible to tangle, extremely easy to handle.

The premium invisible package includes a cable that enhances the comfort and audio quality, along with plenty of superior features. Built by one of the world's most prestigious cable manufacturers, this cable acts as a "loudness" button on monitors, providing an unprecedented audio experience:

* Termination: 3.5 TRS (90 ° angled), 2.5 TRRS *

* Copper-plated silver conductors

Twisted-pair cable - 84 wires

* Weight: 5-6g

* Length: 127 cm / 50 "

* Impedance: 1.50 Ω

* Tensile strength: 60 N / 6 kgF

* Stethoscopic effect: very low

* Not tangled, easily tightened / installed

  • color: transparent
  • one BA speaker per side
  • hardness 70 SHORE, soft finish
  • Frequency response: 20Hz-18kHz
  • 111 dB SPL @ 1kHz @ 1 mW
  • Impedance: 50 Ohm @ 1 kHz
  • THD @ 100 dB SPL: 0.4%
  • cable length: 120cm
  • standard replacement cable = 30 €
  • Full service = standard replacement cable, new drivers, new filters, new faceplate = 100 €
  • Reshell service, with electronic components recovery = reprinting of plugs, with recovery of the electronics, including replacement of faceplate = 125 €
  • Replacement of T2 connectors within the premium options = 30 € / side, with new included faceplate.

Because our products are unique and personalised, we'll ask for full payment in advance when placing your order.
Your order is confirmed when we receive your payment.
We will start working on your monitors after we receive and confirm the impressions, according to the guide we provide here.
From that time, monitors will be produced in up to 45 calendar days (delivery time not included).

 

WHAT YOU GET:

  • a set of JUPITER monitors
  • Protective rubber case made of waterproof rubber
  • User manual
  • Certificate of conformity
  • Warranty certificate (12 months for the electronic part)