REFERENCE

3 drivers in ear monitor

REFERENCE

3 drivers in ear monitor

Low impedance makes REFERENCE a perfect standard, being easy to control from any audio device.

Pairing with a premium Linum cable will increase the frequency response and extend the stereo image. With an impedance of only 0.75 ohms, the SuperBaX cables make the perfect match with your monitors, maximizing both the amplifier and headphone output. A good "squeeze" cable is practically all the better from headphones and amplifiers.

Due to its linear character and small distortions, Reference monitors offer you new decisions for your mix, helping you easily discover what's not in place in the mix.   Isolation up to -30dB will help you in all situations where conventional headphones would fail, and the fact that you won't hear the scene will increase your performance, whether you're a sound artist or an instrumentalist. The linear frequency response makes them usable in any situation, from bass guitar, to blowers.

Whether you are a STUDIO, FOH, monitor, mix or instrumental engineer, the 113dB SPL rendered by the REFERENCE model will give you the headroom reserve to get out of any situation, whether you mix near the scene or in a very loud environment .

1.Personalized faceplate, 3D printed
2. 3 drivers per side (1 x low, 1 x mid + 1 x hi dual combo);
3. 2 way crossover
4. 2 pins connector
5. 3D printed shell, bio-compatible material
6. Special design with 2 acoustic tubes
7&8. 2-pin removable cable
9. TRS 3.5mm golden Jack connector  & jack adapter 6,3mm -> 3,5 mm, included
1.Personalized faceplate, 3D printed
2. 3 drivers per side (1 x low, 1 x mid + 1 x hi dual combo);
3. 2 way crossover
4. 2 pins connector
5. 3D printed shell, bio-compatible material
6. Special design with 2 acoustic tubes
7&8. 2-pin removable cable
9. TRS 3.5mm golden Jack connector  & jack adapter 6,3mm -> 3,5 mm, included

→ Custom 3D PRINTED for maximum comfort

→ Personalization options:noble wood, carbon fiber, brushed aluminum and others

→ LEFT <> RIGHT marks for maximum comfort

→ Shock resistant case

→ Maintenance tool included;

→ Hardness: 100 SHORE A, hard finish.

 TECHNICAL SPECS

→ special design with 2 acoustic tubes;
→ three BA drivers per side (1 x low, 1 x mid + 1 x hi dual combo);
→ 113 db SPL @ 1kHz @ 130 mv RMS;
→ frequency response: 20Hz-16kHz;
→ impredance: 12 Ohm @ 1kHz;
→ THD @ 100 db SPL: <1%;

If you are new to this and have not yet ordered your custom in ear monitors , please access our FAQ section.

The process is simple and fun!